--- bzr.1-unpatched 2018-05-21 11:13:38.236557767 -0400
+++ bzr.1 2018-05-21 11:13:37.884560159 -0400
@@ -733,19 +733,19 @@
A common mistake is to forget to add a new file or directory before
running the commit command. The \-\-strict option checks for unknown
files and aborts the commit if any are found. More advanced pre\-commit
- checks can be implemented by defining hooks. See \\*(Aq\\*(Aqbzr help hooks\\*(Aq\\*(Aq
+ checks can be implemented by defining hooks. See \*(Aq\*(Aqbzr help hooks\*(Aq\*(Aq
for details.
Things to note:
If you accidentially commit the wrong changes or make a spelling
mistake in the commit message say, you can use the uncommit command
- to undo it. See \\*(Aq\\*(Aqbzr help uncommit\\*(Aq\\*(Aq for details.
+ to undo it. See \*(Aq\*(Aqbzr help uncommit\*(Aq\*(Aq for details.
Hooks can also be configured to run after a commit. This allows you
to trigger updates to external systems like bug trackers. The \-\-fixes
option can be used to record the association between a revision and
- one or more bugs. See \\*(Aq\\*(Aqbzr help bugs\\*(Aq\\*(Aq for details.
+ one or more bugs. See \*(Aq\*(Aqbzr help bugs\*(Aq\*(Aq for details.
.SS "bzr config [NAME]"
@@ -1046,7 +1046,7 @@
Ignore specified files or patterns.
-See \\*(Aq\\*(Aqbzr help patterns\\*(Aq\\*(Aq for details on the syntax of patterns.
+See \*(Aq\*(Aqbzr help patterns\*(Aq\*(Aq for details on the syntax of patterns.
If a .bzrignore file does not exist, the ignore command
will create one and add the specified files or patterns to the newly
@@ -1422,8 +1422,8 @@
Output control:
The log format controls how information about each revision is
- displayed. The standard log formats are called \\*(Aq\\*(Aqlong\\*(Aq\\*(Aq, \\*(Aq\\*(Aqshort\\*(Aq\\*(Aq
- and \\*(Aq\\*(Aqline\\*(Aq\\*(Aq. The default is long. See \\*(Aq\\*(Aqbzr help log\-formats\\*(Aq\\*(Aq
+ displayed. The standard log formats are called \*(Aq\*(Aqlong\*(Aq\*(Aq, \*(Aq\*(Aqshort\*(Aq\*(Aq
+ and \*(Aq\*(Aqline\*(Aq\*(Aq. The default is long. See \*(Aq\*(Aqbzr help log\-formats\*(Aq\*(Aq
for more details on log formats.
The following options can be used to control what information is
@@ -1440,7 +1440,7 @@
just the top level (mainline).
Status summaries are shown using status flags like A, M, etc. To see
- the changes explained using words like \\*(Aq\\*(Aqadded\\*(Aq\\*(Aq and \\*(Aq\\*(Aqmodified\\*(Aq\\*(Aq
+ the changes explained using words like \*(Aq\*(Aqadded\*(Aq\*(Aq and \*(Aq\*(Aqmodified\*(Aq\*(Aq
instead, use the \-vv option.
Ordering control:
@@ -1460,7 +1460,7 @@
\-r..Y display up to and including revision Y
\-rX..Y display from X to Y inclusive
- See \\*(Aq\\*(Aqbzr help revisionspec\\*(Aq\\*(Aq for details on how to specify X and Y.
+ See \*(Aq\*(Aqbzr help revisionspec\*(Aq\*(Aq for details on how to specify X and Y.
Some common examples are given below:
\-r\-1 show just the tip
@@ -1496,14 +1496,14 @@
In this case:
- * \\*(Aq\\*(Aqbzr log guide.txt\\*(Aq\\*(Aq will log the file added in revision 1
+ * \*(Aq\*(Aqbzr log guide.txt\*(Aq\*(Aq will log the file added in revision 1
- * \\*(Aq\\*(Aqbzr log tutorial.txt\\*(Aq\\*(Aq will log the new file added in revision 3
+ * \*(Aq\*(Aqbzr log tutorial.txt\*(Aq\*(Aq will log the new file added in revision 3
- * \\*(Aq\\*(Aqbzr log \-r2 \-p tutorial.txt\\*(Aq\\*(Aq will show the changes made to
+ * \*(Aq\*(Aqbzr log \-r2 \-p tutorial.txt\*(Aq\*(Aq will show the changes made to
the original file in revision 2.
- * \\*(Aq\\*(Aqbzr log \-r2 \-p guide.txt\\*(Aq\\*(Aq will display an error message as there
+ * \*(Aq\*(Aqbzr log \-r2 \-p guide.txt\*(Aq\*(Aq will display an error message as there
was no file called guide.txt in revision 2.
Renames are always followed by log. By design, there is no need to
@@ -1526,21 +1526,21 @@
Guide and
.
- You may find it useful to add the aliases below to \\*(Aq\\*(Aqbazaar.conf\\*(Aq\\*(Aq:
+ You may find it useful to add the aliases below to \*(Aq\*(Aqbazaar.conf\*(Aq\*(Aq:
[ALIASES]
tip = log \-r\-1
top = log \-l10 \-\-line
show = log \-v \-p
- \\*(Aq\\*(Aqbzr tip\\*(Aq\\*(Aq will then show the latest revision while \\*(Aq\\*(Aqbzr top\\*(Aq\\*(Aq
+ \*(Aq\*(Aqbzr tip\*(Aq\*(Aq will then show the latest revision while \*(Aq\*(Aqbzr top\*(Aq\*(Aq
will show the last 10 mainline revisions. To see the details of a
- particular revision X, \\*(Aq\\*(Aqbzr show \-rX\\*(Aq\\*(Aq.
+ particular revision X, \*(Aq\*(Aqbzr show \-rX\*(Aq\*(Aq.
If you are interested in looking deeper into a particular merge X,
- use \\*(Aq\\*(Aqbzr log \-n0 \-rX\\*(Aq\\*(Aq.
+ use \*(Aq\*(Aqbzr log \-n0 \-rX\*(Aq\*(Aq.
- \\*(Aq\\*(Aqbzr log \-v\\*(Aq\\*(Aq on a branch with lots of history is currently
+ \*(Aq\*(Aqbzr log \-v\*(Aq\*(Aq on a branch with lots of history is currently
very slow. A fix for this issue is currently under development.
With or without that fix, it is recommended that a revision range
be given when using the \-v option.
@@ -2413,8 +2413,8 @@
not yet committed. These revisions will be included as additional parents
of the next commit. Normally, using revert clears that list as well as
reverting the files. If any files are specified, revert leaves the list
-of uncommitted merges alone and reverts only the files. Use \\*(Aq\\*(Aqbzr revert.\\*(Aq\\*(Aq in the tree root to revert all files but keep the recorded merges,
-and \\*(Aq\\*(Aqbzr revert \-\-forget\-merges\\*(Aq\\*(Aq to clear the pending merge list without
+of uncommitted merges alone and reverts only the files. Use \*(Aq\*(Aqbzr revert.\*(Aq\*(Aq in the tree root to revert all files but keep the recorded merges,
+and \*(Aq\*(Aqbzr revert \-\-forget\-merges\*(Aq\*(Aq to clear the pending merge list without
reverting any files.
Using "bzr revert \-\-forget\-merges", it is possible to apply all of the
@@ -2500,7 +2500,7 @@
directly from the merge directive, without retrieving data from a
branch.
-\\*(Aqbzr send\\*(Aq creates a compact data set that, when applied using bzr
+\*(Aqbzr send\*(Aq creates a compact data set that, when applied using bzr
merge, has the same effect as merging from the source branch.
By default the merge directive is self\-contained and can be applied to any
@@ -2559,8 +2559,8 @@
bzr pull by specifying a file containing a merge directive as the location.
bzr send makes extensive use of public locations to map local locations into
-URLs that can be used by other people. See \\*(Aqbzr help configuration\\*(Aq to
-set them, and use \\*(Aqbzr info\\*(Aq to display them.
+URLs that can be used by other people. See \*(Aqbzr help configuration\*(Aq to
+set them, and use \*(Aqbzr info\*(Aq to display them.
.SS "bzr serve"
@@ -2569,7 +2569,7 @@
server. Supplying \-\-allow\-writes
enables write access to the contents of
the served directory and below. Note
- that \\*(Aq\\*(Aqbzr serve\\*(Aq\\*(Aq does not perform
+ that \*(Aq\*(Aqbzr serve\*(Aq\*(Aq does not perform
authentication, so unless some form of
external authentication is arranged
supplying this option leads to global
@@ -2837,12 +2837,12 @@
It is an error to give a tag name that already exists unless you pass
\-\-force, in which case the tag is moved to point to the new revision.
-To rename a tag (change the name but keep it on the same revsion), run \\*(Aq\\*(Aqbzr
-tag new\-name \-r tag:old\-name\\*(Aq\\*(Aq and then \\*(Aq\\*(Aqbzr tag \-\-delete oldname\\*(Aq\\*(Aq.
+To rename a tag (change the name but keep it on the same revsion), run \*(Aq\*(Aqbzr
+tag new\-name \-r tag:old\-name\*(Aq\*(Aq and then \*(Aq\*(Aqbzr tag \-\-delete oldname\*(Aq\*(Aq.
If no tag name is specified it will be determined through the
\*(Aqautomatic_tag_name\*(Aq hook. This can e.g. be used to automatically tag
-upstream releases by reading configure.ac. See \\*(Aq\\*(Aqbzr help hooks\\*(Aq\\*(Aq for
+upstream releases by reading configure.ac. See \*(Aq\*(Aqbzr help hooks\*(Aq\*(Aq for
details.
.SS "bzr tags"
@@ -3151,7 +3151,7 @@
and switch between them.
To disable the current view without deleting it, you can switch to
-the pseudo view called \\*(Aq\\*(Aqoff\\*(Aq\\*(Aq. This can be useful when you need
+the pseudo view called \*(Aq\*(Aqoff\*(Aq\*(Aq. This can be useful when you need
to see the whole tree for an operation or two (e.g. merge) but
want to switch back to your view after that.
@@ -3305,5 +3305,4 @@
.br
log10 = log \-\-short \-r \-10..\-1
.SH "SEE ALSO"
-.UR http://bazaar.canonical.com/
-.BR http://bazaar.canonical.com/
+http://bazaar.canonical.com/